Stock
Diameters: 1/2″ – 1-1/2″
Origin: Domestic
Finish: Plain and mechanically galvanized
Item: Load indicating washers for A325 only
Dimensions
Click to show drawing
| A325 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Bolt Size | B | C | A | Number of Protrusions | PTD* Max | Part Numbers | |||
| Max OD | Thickness After Compression | ID Max | Squirter ® | Standard | |||||
| Plain | Galvanized | Plain | Galvanized | ||||||
| 1⁄2 | 1.187 | 0.120 | 0.527 | 4 | 0.788 | 12621 | 12622 | 16485 | 17287 |
| 5⁄8 | 1.375 | 0.140 | 0.658 | 4 | 0.956 | 12623 | 12624 | 15909 | 17288 |
| 3⁄4 | 1.625 | 0.140 | 0.790 | 5 | 1.125 | 12625 | 12626 | 12678 | 17289 |
| 7⁄8 | 1.875 | 0.160 | 0.921 | 5 | 1.294 | 12627 | 12628 | 12645 | 17290 |
| 1 | 2.000 | 0.180 | 1.052 | 6 | 1.463 | 12629 | 12630 | 12646 | 17291 |
| 11⁄8 | 2.250 | 0.180 | 1.183 | 6 | 1.631 | 17296 | 17297 | 18996 | 18997 |
| 11⁄4 | 2.500 | 0.180 | 1.315 | 7 | 1.800 | 18371 | 17299 | 17298 | 17293 |
| 13⁄8 | 2.750 | 0.180 | 1.446 | 7 | 1.969 | 17300 | 19419 | 17294 | 17301 |
| 11⁄2 | 3.000 | 0.180 | 1.577 | 8 | 2.138 | 17302 | 17303 | 18408 | 19418 |
| A490 | |||||||||
| Bolt Size | B | C | A | Number of Protrusions | PTD* Max | Part Numbers | |||
| Max OD | Thickness After Compression | ID Max | Squirter ® | Standard | |||||
| Plain | Galvanized | Plain | Galvanized | ||||||
| 1⁄2 | 1.375 | 0.120 | 0.527 | 5 | 0.788 | – | – | – | – |
| 5⁄8 | 1.625 | 0.140 | 0.658 | 5 | 0.956 | – | – | – | – |
| 3⁄4 | 1.750 | 0.160 | 0.790 | 6 | 1.125 | – | – | – | – |
| 7⁄8 | 2.000 | 0.180 | 0.921 | 6 | 1.294 | – | – | – | – |
| 1 | 2.250 | 0.180 | 1.052 | 7 | 1.463 | – | – | – | – |
| 11⁄8 | 2.500 | 0.180 | 1.183 | 7 | 1.631 | – | – | – | – |
| 11⁄4 | 2.750 | 0.180 | 1.315 | 8 | 1.800 | – | – | – | – |
| 13⁄8 | 3.000 | 0.180 | 1.446 | 8 | 1.969 | – | – | – | – |
| 11⁄2 | 3.250 | 0.180 | 1.577 | 9 | 2.138 | – | – | – | – |
| Dimension specifications per ASTM F959. *Protrusion Tangential Diameter | |||||||||